Rotary Vane Compressors

Proved in over 30 years of field operation, Waukee compressors are designed to be easy to maintain and service. This means that downtime is kept to a minimum. Features include simple design with few moving parts, rotary vane constructions, and built-in automatic closed-circuit unloader in which gas not needed is recirculated within the compressor. (Depending on pressure and flow rates, a bypass regulator my be used instead.)

The 6-vane rotor is supported at both ends by factory sealed and lubricated ball bearings. Operation is relatively quiet. There are no gears, springs, or metal contacts. The low-friction vanes slide in and out of the rotor slots centrifugally.

Capacity:

The Waukee Rotary Vane Compressors can be provided from 200 cfh (5.6 cm/h) to 8,000 cfh (226 cm/h) at pressures up to 3 psig (20.68 kPa) on standard models.

top

List of products:

• gas flow-meter

• liquid flow-meter

• electronic flow-meter

• nitrogen and methanol control system

• electronic control valve

• flow controller

• flow totalizer

• analogue flow sensor

• propane and air mixer

• gas mixing panel

• precision gas ratio mixing system

• methanol sparger tube assembly

• compressors

• compressor pressure controller

Services:

• in-field calibration service

Applications:

• neutral hardening

• carburizing

• nitriding

• "trim gas" for endothermic and exothermic generators

• nitrogen-methanol systems

• and more
  
  

top