home  |  legal aspects
About Us Heat Treating Energy & Environmental Solutions Flow Control Equipment News Contact us

    Deutsch    |    Franšais    |    Polski    |        |    Search Site         

Downloads

 

 
CONTROLLERS FOR HEAT TREATING

 

 PROTHERM 10


TEMPERATURE CONTROLLER
FOR HEAT TREATING PROCESSE
S

The PROTHERM 10 is a cost-effective temperature and industrial controller with expanded functionality, including a programmer and an optional datalogger.

 MAIN FEATURES :

  • 100 ms cycle time, i.e. also suitable for fast control loops

  • Up to three freely configurable analog outputs, e.g. as process value output

  • Up to 9 relay outputs

  • Customer-specific linearization for all sensors

  • Settings can be blocked via password and internal switch for high security

  • Extended temperature range up to 131░F (55░C) allows mounting close to the process

  • Modular design

  • Easy 2-point or offset measurement correction

  • Logical combination of digital outputs, e.g. for general alarm

  • RS 422/485 Modbus RTU interface

  • Ethernet interface

  • USB port

  • Configuration interface

  • Optional built-in transmitter power supply

  • Splash-water proof front IP 66

  • Setup-Wizard

HMI DISPLAY :

  • Graphical, clearly readable red or green display (160 x 80 pixels)

  • Dual colour display (green / red)

  • Colour changes e.g. on alarm

  • Multi-language option (English, French, German, Italian, Spanish)

  • Custom splash-screen on startup (bitmap file)

  • Alarm status view

  • Trend view

  • Status LEDs for heating / cooling

  • Self-tuning function and alarm

CONFIGURATION & OPERATION:

  • Convenient setup Wizard for simple configuration (inputs, alarms, outputs, communication, and real-time clock)

  • Universal input for thermocouple, RTDs, and standard signals (mA, mV or V)

  • Versatile output options: Relay, SSR driver, Triac, and standard signals (max. 9) for precise adaptation to the process.

  • Digital inputs (2 max) for setpoint selection, programmer control, datalogger start/stop, control output enable/disable or auto/manual control.

  • Configurable menus

  • USB port for local upload/download of configuration files & download of logged data.

  • Password protected Supervisor and Configuration mode

  • Pre-tune and self-tune function

  • Master-slave configuration for multi-zone applications

PROGRAMMER (OPTIONAL):

  • Up to 255 segments for free allocation in max. 64 programs.

  • Ramp, Dwell, Hold, Loop, or Jump to other program.

  • User-defined program names.

  • Delayed or real-time (date/time) program start.

  • Up to 5 event outputs.

DATALOGGER (OPTIONAL):

  • Recording of historic process data for analysis or reporting.

  • Data exported as *.csv files via front USB port or rear interface.

  • Logging of process values, setpoints or alarms (including min, max, and average).

  • Run-then-stop or FIFO (first in - first out) buffer recording.

  • Logging intervals from 1sec to 30 minutes.

PLUG-IN UNIT :

Protherm 10 program controllers are built as plug-in modules. This permits a controller to be replaced very quickly without disturbing the wiring. All that is needed is a screwdriver to release the front catch.

BACK